Metallic Epoxy Flooring in St. George, UT
Quick answer: Metallic epoxy is a decorative floor where reflective pigments are worked into clear resin to create one-of-a-kind marble, lava, or pearl effects. Saint George Epoxy grinds and repairs the slab first, applies the metallic layer, then seals it with a UV-stable clear topcoat so it doesn't yellow in desert sun. It suits show garages, casitas, and retail. Call (435) 291-8646.
Metallic epoxy is the most visually dramatic floor we install. No two are alike: the pigment moves as it's worked, leaving depth, swirl, and a reflective sheen that changes with the light. In southern Utah it has a natural home — copper, bronze, and rust tones read straight off the red cliffs, and slate or pearl finishes fit the clean lines of desert-modern homes in Ivins, Entrada, and Kayenta.
How is a metallic epoxy floor installed?
- Grind and repair: metallic finishes are unforgiving — low spots, patches, and cracks can show through, so surface prep is extra careful
- Primer: seals the slab so the metallic coat doesn't outgas or pinhole
- Base color coat: sets the background tone under the metallic layer
- Metallic layer: pigmented clear epoxy, manipulated by hand and tool for the chosen effect
- UV-stable clear topcoat: polyaspartic or aliphatic urethane to protect the look from sun and scratches
Why does UV matter so much for metallic floors here?
Standard epoxy is aromatic, which means it ambers (turns yellow) with UV exposure. On a flake floor that's hard to notice; on a pearl-white or silver metallic it's obvious within a season if sunlight hits the floor. In St. George, where garage doors stay open on spring afternoons and casitas have big windows, a UV-stable topcoat is not optional. Compare chemistries on polyaspartic vs epoxy and read our desert UV guide.
Heat and metallic installs
Metallic effects depend on the resin staying workable long enough to move pigment. On a 100°F day a hot slab can cut that window sharply, so we schedule metallic pours for early morning or cooler months and keep the space shaded where possible. That scheduling is one reason metallic projects cost more and take longer than flake.
Is metallic epoxy good for a garage?
It can be — with realistic expectations. Metallic floors are high-gloss and smooth, so they show dust and tire marks more than flake, and can be slick when wet unless we add anti-slip texture to the topcoat. Many homeowners pick metallic for a show bay, a golf-cart garage, or a casita, and flake for the daily-driver side.
Where does metallic epoxy work best?
- Show and collector garages where appearance matters most
- Casitas, basements, game rooms, and home gyms (see interior epoxy)
- Salons, boutiques, and showrooms around St. George and Washington
- Short-term rentals where a distinctive floor helps the listing photos
Choosing colors
We review color combinations and sample effects with you before install. Popular choices here include copper and bronze with a charcoal base, “desert sand” tans, and cool slate-gray or pearl for modern interiors. Final results vary because each floor is hand-worked, which is part of the appeal.
How much does metallic epoxy cost?
Metallic is typically the premium tier because of extra prep, more coats, and hand labor. Your quote depends on size, colors, layers, and slab condition; see the cost guide for what drives the number.
Where we install metallic epoxy floors
We install metallic epoxy floors throughout St. George — including Bloomington, Little Valley, and Green Valley — and in nearby towns such as Ivins, Santa Clara, Washington, Hurricane. See every area on the areas we serve list.
Metallic epoxy in southern Utah: what changes from a showroom photo
Most metallic epoxy photos online come from mild-climate showrooms. Southern Utah is different, and it changes how a metallic floor should be specified. Strong year-round sun means any floor near an open garage door, a casita slider or a storefront window needs an aliphatic, UV-stable topcoat, or the clear layers can amber over time. Summer slab temperatures shorten the working time of the metallic layer, so we pour early, keep material shaded and limit the size of each pour section to keep the movement and swirl consistent. Fine red dust is the third factor: a high-gloss metallic floor shows dust more than flake does, which is why many local homeowners choose a mid-tone metallic with movement rather than a very dark mirror finish.
Where it works best locally: show garages, casita and game-room floors, home gyms, barbershops, salons and small showrooms in St. George, Washington, Santa Clara and Ivins. For working garages that park daily drivers, a flake system is usually more forgiving, and the desert heat and UV guide explains why topcoat choice matters so much here.
Metallic Epoxy Floors FAQ — St. George
How long does metallic epoxy take to install?
Most residential metallic floors take two to three days including grinding, primer, metallic coat, and topcoat, plus cure time before heavy use.
Can I choose my metallic colors?
Yes. We review color combinations and sample effects before install. Final results vary because each floor is hand-worked.
Is metallic epoxy durable?
With proper prep and a quality topcoat it is durable for residential and light commercial use. Its gloss shows scratches more readily than flake, so mats and felt pads help in high-wear areas.
Will metallic epoxy yellow in the sun?
An epoxy clear coat can amber in direct sun. We finish metallic floors with a UV-stable aliphatic topcoat such as polyaspartic to prevent that.
Can metallic epoxy go in a garage that gets afternoon sun?
Yes, with a UV-stable aliphatic topcoat such as polyaspartic over the metallic layer. Without it, clear epoxy can amber where the sun hits.
Is metallic epoxy available outside St. George?
Yes. We install metallic floors across Washington County, including Washington, Hurricane, Santa Clara, Ivins and LaVerkin, and can quote other southern Utah towns by arrangement.
Does metallic epoxy show red dust?
More than flake does, because the surface is glossy and smooth. Mid-tone colors with movement hide dust better than very dark mirror finishes.
Who is Saint George Epoxy?
Saint George Epoxy is a locally focused epoxy flooring contractor based in St. George, Utah, serving homeowners and businesses across Washington County and southern Utah. We are a service-area business with no public showroom; the fastest way to reach us is (435) 291-8646 (call or text, Mon–Sat 7 AM–8 PM). Learn more on our about page, or see how we work on the install process and prep & warranty pages.
Prefer texture and dust-hiding over a mirror finish? Compare chip sizes and blends on our flake epoxy floors in St. George page.
Want a written, site-specific quote? Call or text Saint George Epoxy at (435) 291-8646 or use the form — estimates are free and on-site.
Call (435) 291-8646